learn.howToCalculate
learn.whatIsHeading
Critical speed is the rotational speed at which a rotating shaft reaches natural frequency resonance. Operating above or below critical speed is essential.
الصيغة
Calculate: N_crit = (60 × √(g × δ)) / (π × √(W/g))
- W
- W value — Variable used in the calculation
دليل خطوة بخطوة
- 1Calculate: N_crit = (60 × √(g × δ)) / (π × √(W/g))
- 2Or use stiffness and inertia: ω_n = √(k/I)
- 3Operating speed should be <70% or >130% of critical
أمثلة محلولة
الإدخال
Shaft natural frequency 3000 rpm
النتيجة
Operating range <2100 rpm or >3900 rpm safe
Avoid 2100-3900 band
أخطاء شائعة يجب تجنبها
- ✕Operating continuously near critical speed
- ✕Under-estimating critical speed (causes resonance)
أسئلة شائعة
What happens at critical speed?
Resonance causes excessive vibration, noise, and potential failure from fatigue.
Can you operate near critical speed briefly?
Yes, passing through critical speed quickly during startup/shutdown is acceptable.
هل أنت مستعد للحساب؟ جرب الآلة الحاسبة Critical Speed المجانية
جربه بنفسك →