কীভাবে Deck গণনা করবেন
Deck কি?
A deck calculator estimates the lumber, hardware, and materials needed to build a wooden deck. It accounts for deck dimensions, board spacing, joist layout, and waste to generate a cut list and material order.
সূত্র
Decking boards = (deck area ÷ board coverage per piece) × (1 + waste %)
ধাপে ধাপে নির্দেশিকা
- 1Calculate deck surface area (length × width)
- 2Determine coverage per board based on board width minus gap spacing
- 3Apply 10–15% waste factor for cuts and defects
- 4Separately calculate joists, posts, beams, and fasteners
সমাধান করা উদাহরণ
ইনপুট
16 ft × 20 ft deck · 5/4×6 boards (5.5 in wide) · 1/4 in gap
ফলাফল
≈ 69 boards needed at 10% waste on 320 sq ft deck
Use treated lumber rated for ground or above-ground contact as appropriate
এড়ানোর সাধারণ ভুল
- ✕Forgetting to add waste factor for angled or diagonal patterns
- ✕Not accounting for joist spacing in deck board count
গণনা করতে প্রস্তুত? বিনামূল্যে Deck ক্যালকুলেটর চেষ্টা করুন
নিজে চেষ্টা করে দেখুন →