কীভাবে Gear Ratio গণনা করবেন
Gear Ratio কি?
Gear ratio is the speed reduction/increase between input and output shafts. It determines torque multiplication and shaft speeds.
সূত্র
Ratio = N_input / N_output = N_driven / N_driver = T_output / T_input
ধাপে ধাপে নির্দেশিকা
- 1Ratio = N_input / N_output = N_driven / N_driver = T_output / T_input
- 2Spur gears: ratio = number of teeth on driven / number on driver
- 3Power is conserved: P = T × ω
সমাধান করা উদাহরণ
ইনপুট
Input 1800 rpm, output 600 rpm
ফলাফল
Gear ratio = 3:1 (3× speed reduction, 3× torque increase)
Power unchanged
এড়ানোর সাধারণ ভুল
- ✕Confusing speed ratio with force multiplication
- ✕Neglecting friction losses in extended calculations
সচরাচর জিজ্ঞাসা
Can any two gears mesh together?
No, they must have same pressure angle and pitch. Teeth must fit smoothly without interference.
How is efficiency handled?
Mechanical power loss (5-10%) converts to heat; P_out = P_in × η.
গণনা করতে প্রস্তুত? বিনামূল্যে Gear Ratio ক্যালকুলেটর চেষ্টা করুন
নিজে চেষ্টা করে দেখুন →