Skip to main content

Praktisk

Modified Fisher Grade for SAH

🌐

Detailed Guide Coming Soon

We're working on a comprehensive educational guide for the Modified Fisher Grade for SAH in your language. The content below is shown in English.

Hvad er Modified Fisher Grade for SAH?

▾

The Modified Fisher Grade is a radiological classification system used to grade the amount and distribution of blood seen on a non-contrast CT scan following subarachnoid haemorrhage (SAH). It was developed as a modification of the original Fisher Scale to better predict symptomatic cerebral vasospasm, which is the leading cause of delayed morbidity and death after SAH. The original Fisher Scale (1980) categorised CT findings into four groups based on the thickness of subarachnoid blood and the presence of intraventricular haemorrhage (IVH). The Modified Fisher Grade, developed by Frontera and colleagues in 2006, further refines this by separating cases with and without IVH at each thickness category, yielding a five-tier grading system (0-4). Grade 0 represents no SAH or IVH; Grade 1 indicates thin SAH without IVH; Grade 2 indicates thin SAH with IVH; Grade 3 indicates thick SAH without IVH; and Grade 4 indicates thick SAH with IVH. Grades 3 and 4 carry the highest risk of symptomatic vasospasm, as the volume of subarachnoid blood drives the inflammatory cascade that leads to arterial spasm. The Modified Fisher Grade is routinely used alongside the Hunt-Hess clinical grade to provide a comprehensive picture of both radiological severity and clinical status in SAH patients.

PrimeCalcPro provides professional-grade tools trusted by businesses and academics.

Formel

▾
f(x)Modified Fisher Grade: 0=No SAH and No IVH; 1=Thin SAH (≤1mm) and No IVH; 2=Thin SAH (≤1mm) + IVH present; 3=Thick SAH (>1mm) and No IVH; 4=Thick SAH (>1mm) + IVH present; 'Thin'=<1mm in any cistern; 'Thick'=≥1mm or clot in cistern/fissure

Variabelbeskrivelse

▾
SymbolNavnEnhedBeskrivelse
IVHIntraventricular Haemorrhagepresent/absentThe electrical resistance measured in ohms, representing the opposition to current flow in the circuit and determining voltage drop and power dissipation in the component
MFGModified Fisher Grade0-4The electrical resistance measured in ohms, representing the opposition to current flow in the circuit and determining voltage drop and power dissipation in the component
DCIDelayed Cerebral IschaemiabinaryThe periodic payment amount made at regular intervals, typically monthly or annually, including both principal and interest components in amortizing loan calculations

Sådan Modified Fisher Grade for SAH

▾
  1. 1Obtain a non-contrast CT brain scan as soon as SAH is suspected — sensitivity is >95% within 6 hours of ictus.
  2. 2Identify the presence or absence of blood in the subarachnoid cisterns (basal cisterns, sylvian fissures, interhemispheric fissure).
  3. 3Measure blood layer thickness: thin SAH is defined as blood measuring less than 1 mm in any single layer; thick SAH is blood ≥1 mm or any discrete clot filling a cistern or fissure.
  4. 4Determine whether intraventricular haemorrhage (IVH) is present — blood visible in the ventricles on CT.
  5. 5Assign the Modified Fisher Grade: 0 (no SAH/IVH), 1 (thin SAH, no IVH), 2 (thin SAH + IVH), 3 (thick SAH, no IVH), 4 (thick SAH + IVH).
  6. 6Higher grades (3-4) correlate with increased risk of symptomatic vasospasm (delayed cerebral ischaemia) in days 4-14.
  7. 7Use the grade alongside Hunt-Hess for comprehensive risk stratification and to guide TCD monitoring and nimodipine therapy intensity.

Løste eksempler

▾
Eksempel 1Grade 0 — No Haemorrhage
Givet:CT shows no subarachnoid blood and no IVH — LP performed due to clinical suspicion
Resultat:Modified Fisher Grade 0

Consider LP if CT negative but suspicion high — xanthochromia can confirm SAH

A negative CT within 6 hours has >95% sensitivity. Beyond 6 hours, LP for xanthochromia or spectrophotometry is required if clinical suspicion persists.

Eksempel 2Grade 1 — Thin SAH
Givet:Thin layer of blood (0.5 mm) in basal cisterns, no blood in ventricles
Resultat:Modified Fisher Grade 1

Low vasospasm risk; standard nimodipine and TCD monitoring

Thin SAH without IVH carries the lowest vasospasm risk among confirmed SAH cases. Symptomatic vasospasm rate approximately 14%.

Eksempel 3Grade 3 — Thick SAH
Givet:Dense blood clot filling the right sylvian fissure (>1 mm thick), ventricles clear
Resultat:Modified Fisher Grade 3

High vasospasm risk; intensive TCD monitoring from day 3 and daily neurological assessment

Grade 3 has the highest absolute vasospasm risk. The large subarachnoid clot burden drives the inflammatory cascade leading to arterial spasm.

Eksempel 4Grade 4 — Thick SAH + IVH
Givet:Thick blood in all basal cisterns plus blood filling both lateral ventricles
Resultat:Modified Fisher Grade 4

Highest risk category; EVD for hydrocephalus likely required in addition to vasospasm monitoring

IVH adds hydrocephalus risk to vasospasm risk. EVD may be needed urgently. Vasospasm monitoring and hypervolemia/hypertension treatment are critical in days 4-14.

Praktiske anvendelser

▾
🏗️

Primary care physicians and internists use Fisher Grade during routine clinical assessments to screen patients, establish baselines for longitudinal monitoring, and identify individuals who may need referral to specialists for further diagnostic evaluation or therapeutic intervention.

🔬

Hospital clinical pharmacists apply Fisher Grade to verify drug dosing calculations, particularly for medications with narrow therapeutic indices like warfarin, aminoglycosides, and chemotherapy agents where patient-specific factors such as renal function and body weight critically affect safe dosing ranges.

📊

Public health epidemiologists use Fisher Grade in population-level screening programs to calculate disease prevalence, assess screening test sensitivity and specificity, and determine the number needed to screen to detect one case in various demographic subgroups.

🏥

Clinical researchers incorporate Fisher Grade into study design protocols to calculate sample sizes, determine statistical power for detecting clinically meaningful differences, and establish inclusion criteria based on quantitative physiological thresholds.

Særlige tilfælde

▾

Pediatric versus adult reference ranges

In practice, this edge case requires careful consideration because standard assumptions may not hold. When encountering this scenario in fisher grade calculations, practitioners should verify boundary conditions, check for division-by-zero risks, and consider whether the model's assumptions remain valid under these extreme conditions.

Pregnancy and hormonal variations

In practice, this edge case requires careful consideration because standard assumptions may not hold. When encountering this scenario in fisher grade calculations, practitioners should verify boundary conditions, check for division-by-zero risks, and consider whether the model's assumptions remain valid under these extreme conditions.

Extreme body composition

In practice, this edge case requires careful consideration because standard assumptions may not hold. When encountering this scenario in fisher grade calculations, practitioners should verify boundary conditions, check for division-by-zero risks, and consider whether the model's assumptions remain valid under these extreme conditions.

Traumatic SAH

The Modified Fisher Grade was validated for aneurysmal SAH. Traumatic SAH has a different blood distribution pattern and much lower vasospasm risk. The scale should not be used prognostically in trauma patients.

Modified Fisher Grade and Vasospasm Risk

▾
GradeCT FindingSymptomatic Vasospasm Risk
0No SAH, No IVH~0%
1Thin SAH, No IVH~14%
2Thin SAH + IVH~14%
3Thick SAH, No IVH~33%
4Thick SAH + IVH~40%

Ofte stillede spørgsmål

▾
Q

What is the Modified Fisher Grade used for?

A

Fisher Grade is a specialized calculation tool designed to help users compute and analyze key metrics in the health and medical domain. It takes specific numeric inputs — typically drawn from real-world data such as measurements, rates, or quantities — and applies a validated mathematical formula to produce actionable results. The tool is valuable because it eliminates manual calculation errors, provides instant feedback when exploring different scenarios, and serves as both a decision-support instrument for professionals and a learning aid for students studying the underlying principles.

Q

What is the difference between the original Fisher Scale and the Modified Fisher Grade?

A

Fisher Grade is a specialized calculation tool designed to help users compute and analyze key metrics in the health and medical domain. It takes specific numeric inputs — typically drawn from real-world data such as measurements, rates, or quantities — and applies a validated mathematical formula to produce actionable results. The tool is valuable because it eliminates manual calculation errors, provides instant feedback when exploring different scenarios, and serves as both a decision-support instrument for professionals and a learning aid for students studying the underlying principles.

Q

How is the Modified Fisher Grade used alongside Hunt-Hess?

A

To use Fisher Grade, enter the required input values into the designated fields — these typically include the primary quantities referenced in the formula such as rates, amounts, time periods, or physical measurements. The calculator applies the standard mathematical relationship to transform these inputs into the output metric. For best results, verify that all inputs use consistent units, double-check values against source documents, and review the output in context. Running the calculation with slightly different inputs helps reveal which variables have the greatest impact on the result.

Q

What is cerebral vasospasm and when does it occur?

A

Fisher Grade is a specialized calculation tool designed to help users compute and analyze key metrics in the health and medical domain. It takes specific numeric inputs — typically drawn from real-world data such as measurements, rates, or quantities — and applies a validated mathematical formula to produce actionable results. The tool is valuable because it eliminates manual calculation errors, provides instant feedback when exploring different scenarios, and serves as both a decision-support instrument for professionals and a learning aid for students studying the underlying principles.

Q

How does the Modified Fisher Grade scoring system work?

A

The Modified Fisher Grade scoring system is based on a 4-point scale, where 0 indicates no subarachnoid hemorrhage, 1 indicates minimal blood, 2 indicates thin blood layer, 3 indicates thick blood layer, and 4 indicates a combination of thick and thin blood layers. Each score is associated with a specific level of risk for cerebral vasospasm, with higher scores indicating higher risk. For example, a score of 3 or 4 is associated with a higher risk of symptomatic cerebral vasospasm, occurring in approximately 33% of patients. Accurate scoring is crucial for guiding treatment and predicting patient outcomes.

Almindelige fejl at undgå

▾
  • !Applying the Modified Fisher Grade to traumatic SAH, where the scale has not been validated and vasospasm risk is lower.
  • !Confusing thin and thick SAH — the 1 mm threshold is applied to any single layer of blood, not the total volume across all cisterns.
  • !Not distinguishing IVH (blood in the ventricles) from periventricular blood tracking from a subarachnoid collection.
  • !Grading from a CT performed more than 24-48 hours after ictus without noting that blood reabsorption may underestimate initial haemorrhage severity.
  • !Using original Fisher Scale cutpoints when the Modified Fisher Grade has been specified — the two systems have different category boundaries.
💡

Pro Tip

Always document the timing of the CT scan relative to symptom onset when assigning Modified Fisher Grade. Blood reabsorbs rapidly and a scan performed 24 hours after onset may significantly underestimate the initial haemorrhage burden, affecting vasospasm risk prediction.

⭐

Vidste du?

The original Fisher Scale was published in 1980 and was the first tool to link CT blood appearance to vasospasm risk. The key insight — that larger subarachnoid clots cause more vasospasm — revolutionised how clinicians approached post-SAH monitoring and led to the widespread adoption of transcranial Doppler and nimodipine therapy.

📖Sværhedsgrad:Mellemliggende
Stil et spørgsmål

Har du et spørgsmål om denne beregner? Få et detaljeret svar.

Kun til informationsformål. Dette værktøj erstatter ikke professionel medicinsk rådgivning, diagnose eller behandling. Konsulter altid en kvalificeret sundhedsperson.
Deep Dive

Read the full guide on how to use this calculator effectively

Læs mere →
Mathematically verified
Reviewed July 2026
Our methodology

Få ugentlige matematiktips

Slut dig til 12.000+ abonnenter, der får lommeregnertips hver uge.

🔒
100% Gratis
Ingen registrering
✓
Præcis
Verificerede formler
⚡
Øjeblikkelig
Resultater med det samme
📱
Mobilvenlig
Alle enheder

Indstillinger

PrivatlivVilkårOm© 2026 PrimeCalcPro