Πώς να υπολογίσετε το Conduit Fill
Τι είναι το Conduit Fill;
Conduit Fill Calculator helps contractors and tradespeople accurately size, spec, and estimate materials and systems.
Τύπος
Fill % = (Sum of Wire Cross-section Areas / Conduit Area) × 100
Οδηγός βήμα προς βήμα
- 1Look up wire cross-sections from NEC table, sum, compare to conduit
- 2Apply the formula using your project measurements
- 3Add required safety factors or waste allowances per code
Worked Examples
Εισαγωγή
3 wires in 1/2 inch conduit, 40% max fill
Αποτέλεσμα
Fill = Σ wire areas / conduit area — must be ≤40%
Common Mistakes to Avoid
- ✕Not applying code-required safety factors or derating
- ✕Forgetting to account for waste and cut losses in material estimates
Είστε έτοιμοι να υπολογίσετε; Δοκιμάστε τον δωρεάν υπολογιστή Conduit Fill
Δοκιμάστε το μόνοι σας →