learn.howToCalculate
learn.whatIsHeading
Grease Trap Sizing Calculator helps contractors and tradespeople accurately size, spec, and estimate materials and systems.
Fórmula
Trap Size (GPM) = Flow Rate from Fixtures / Retention Time
Guía paso a paso
- 1Count fixture units connected, calculate peak flow rate
- 2Apply the formula using your project measurements
- 3Add required safety factors or waste allowances per code
Ejemplos resueltos
Entrada
3 sinks at 2 GPM each, 2-minute retention
Resultado
Trap = 6 GPM flow → use 10 GPM trap
Errores comunes a evitar
- ✕Not applying code-required safety factors or derating
- ✕Forgetting to account for waste and cut losses in material estimates
learn.ctaText
Pruébalo tú mismo →