learn.howToCalculate
learn.whatIsHeading
The Wheatstone bridge is a circuit used to measure unknown electrical resistance by balancing two legs of a bridge circuit. R_unknown = R3 × (R2/R1).
Fórmula
At balance: R1/R2 = R3/Rx — solve for unknown Rx
- At
- R3/Rx — solve for unknown Rx — R3/Rx — solve for unknown Rx
- R1
- R3/Rx — solve for unknown Rx — R3/Rx — solve for unknown Rx
- R2
- R3/Rx — solve for unknown Rx — R3/Rx — solve for unknown Rx
- R3
- R3 value — Variable used in the calculation
- Rx
- Rx value — Variable used in the calculation
Guía paso a paso
- 1Four resistors arranged in a diamond (bridge) configuration
- 2A galvanometer in the centre detects current imbalance
- 3At balance: R1/R2 = R3/Rx — solve for unknown Rx
Ejemplos resueltos
Entrada
R1=100Ω, R2=200Ω, R3=150Ω
Resultado
Rx = 300Ω
Bridge balanced when R1/R2 = R3/Rx
Errores comunes a evitar
- ✕Assuming the bridge must be exact — modern circuits use operational amplifiers for nulling
- ✕Ignoring lead resistance in precision measurements
Preguntas frecuentes
What is a Wheatstone bridge used for?
Precision measurement of resistance, strain gauges, temperature sensors (RTDs), and load cells.
What happens when the bridge is balanced?
No current flows through the galvanometer. The voltage across it is zero.
learn.ctaText
Pruébalo tú mismo →