learn.howToCalculate
learn.whatIsHeading
Hall-Petch strengthening: yield strength = σ₀ + k·d^(-1/2), where d is grain diameter; primary strengthening mechanism.
Guide étape par étape
- 1Input material constants σ₀ and k
- 2Vary grain size
- 3Calculate predicted yield strength
Exemples résolus
Entrée
Steel: σ₀ = 50 MPa, k = 0.8 MPa√mm
Résultat
1mm grains → 50.8 MPa, 0.01mm → 80 MPa strength increase
Erreurs courantes à éviter
- ✕Using wrong units for grain size
- ✕Applying beyond material's valid range
Questions fréquentes
Is Hall-Petch always linear?
Approximately yes; breaks down at very small grain sizes (<100 nm).
Prêt à calculer ? Essayez la calculatrice gratuite Hall Petch
Essayez-le vous-même →