Critical Speed ની ગણતરી કેવી રીતે કરવી
Critical Speed શું છે?
Critical speed is the rotational speed at which a rotating shaft reaches natural frequency resonance. Operating above or below critical speed is essential.
સૂત્ર
Calculate: N_crit = (60 × √(g × δ)) / (π × √(W/g))
- W
- W value — Variable used in the calculation
પગલું દ્વારા પગલું માર્ગદર્શિકા
- 1Calculate: N_crit = (60 × √(g × δ)) / (π × √(W/g))
- 2Or use stiffness and inertia: ω_n = √(k/I)
- 3Operating speed should be <70% or >130% of critical
Worked Examples
ઇનપુટ
Shaft natural frequency 3000 rpm
પરિણામ
Operating range <2100 rpm or >3900 rpm safe
Avoid 2100-3900 band
Common Mistakes to Avoid
- ✕Operating continuously near critical speed
- ✕Under-estimating critical speed (causes resonance)
Frequently Asked Questions
What happens at critical speed?
Resonance causes excessive vibration, noise, and potential failure from fatigue.
Can you operate near critical speed briefly?
Yes, passing through critical speed quickly during startup/shutdown is acceptable.
ગણતરી માટે તૈયાર છો? મફત Critical Speed કેલ્ક્યુલેટર અજમાવી જુઓ
તેને જાતે અજમાવી જુઓ →