Hall Petch ની ગણતરી કેવી રીતે કરવી
Hall Petch શું છે?
Hall-Petch strengthening: yield strength = σ₀ + k·d^(-1/2), where d is grain diameter; primary strengthening mechanism.
પગલું દ્વારા પગલું માર્ગદર્શિકા
- 1Input material constants σ₀ and k
- 2Vary grain size
- 3Calculate predicted yield strength
Worked Examples
ઇનપુટ
Steel: σ₀ = 50 MPa, k = 0.8 MPa√mm
પરિણામ
1mm grains → 50.8 MPa, 0.01mm → 80 MPa strength increase
Common Mistakes to Avoid
- ✕Using wrong units for grain size
- ✕Applying beyond material's valid range
Frequently Asked Questions
Is Hall-Petch always linear?
Approximately yes; breaks down at very small grain sizes (<100 nm).
ગણતરી માટે તૈયાર છો? મફત Hall Petch કેલ્ક્યુલેટર અજમાવી જુઓ
તેને જાતે અજમાવી જુઓ →