Screw Thread Converter ની ગણતરી કેવી રીતે કરવી
Screw Thread Converter શું છે?
Screw thread converters translate between different thread designations: UNC, UNF, metric (M), BSW, etc.
સૂત્ર
Inch: #10-24 UNC = 10 size, 24 threads/inch
- UNC
- 10 size — 10 size
પગલું દ્વારા પગલું માર્ગદર્શિકા
- 1Metric: M10 = 10 mm diameter, coarse (1.5 mm pitch) or fine (1.25 mm)
- 2Inch: #10-24 UNC = 10 size, 24 threads/inch
- 3Non-interchangeable between systems (need washers, adapters)
Worked Examples
ઇનપુટ
M8 metric thread
પરિણામ
8 mm diameter, UNC equivalent #5-40, similar size
Not exactly interchangeable
Common Mistakes to Avoid
- ✕Assuming metric and inch are compatible (they're not)
- ✕Not checking thread pitch (critical for alignment)
Frequently Asked Questions
Can metric and inch threads be used interchangeably?
No, slightly different pitch and angle. Using wrong thread can damage equipment.
What's the difference between coarse and fine pitch?
Fine pitch holds tighter, suits thin walls, vibration-resistant. Coarse easier to assemble, stronger.
ગણતરી માટે તૈયાર છો? મફત Screw Thread Converter કેલ્ક્યુલેટર અજમાવી જુઓ
તેને જાતે અજમાવી જુઓ →