Kako izračunati Belt Drive
Što je Belt Drive?
Belt drive transmits power between shafts using flexible belt around pulleys. It's simple, quiet, and provides overload protection through slipping.
Formula
Calculate: Speed ratio = D_driven / D_driver where D is pulley diameter
- D
- D value — Variable used in the calculation
Vodič korak po korak
- 1Calculate: Speed ratio = D_driven / D_driver where D is pulley diameter
- 2Torque: T = P / ω (power divided by angular velocity)
- 3Tension and slippage determine power capacity
Worked Examples
Unos
Driver 100 mm diameter at 1800 rpm, driven 200 mm
Rezultat
Output speed = 900 rpm, 2:1 reduction
Torque doubles
Common Mistakes to Avoid
- ✕Over-tensioning belts (damages bearings)
- ✕Neglecting wrap angle effects on friction
Frequently Asked Questions
Why slip in belt drives?
Slight slip absorbs shock loads, protects driven equipment. Slip is normal (1-3%) and expected.
How do you prevent excessive slip?
Proper belt tension and friction material selection maintain power transmission.
Spremni za izračun? Isprobajte besplatni Belt Drive kalkulator
Probajte sami →