Kako izračunati Hall Petch
Što je Hall Petch?
Hall-Petch strengthening: yield strength = σ₀ + k·d^(-1/2), where d is grain diameter; primary strengthening mechanism.
Vodič korak po korak
- 1Input material constants σ₀ and k
- 2Vary grain size
- 3Calculate predicted yield strength
Worked Examples
Unos
Steel: σ₀ = 50 MPa, k = 0.8 MPa√mm
Rezultat
1mm grains → 50.8 MPa, 0.01mm → 80 MPa strength increase
Common Mistakes to Avoid
- ✕Using wrong units for grain size
- ✕Applying beyond material's valid range
Frequently Asked Questions
Is Hall-Petch always linear?
Approximately yes; breaks down at very small grain sizes (<100 nm).
Spremni za izračun? Isprobajte besplatni Hall Petch kalkulator
Probajte sami →