Cara Menghitung Beam Deflection
learn.whatIsHeading
Beam deflection calculates downward displacement under loading. Engineers use this to ensure beams don't sag excessively and meet serviceability requirements.
Rumus
The calculator applies beam deflection formulas: δ = PL³/(3EI) for cantilever
Panduan Langkah demi Langkah
- 1Input beam type (cantilever, simply supported, etc.), load type, material properties, and geometry
- 2The calculator applies beam deflection formulas: δ = PL³/(3EI) for cantilever
- 3Results show maximum deflection and compliance with limits
Contoh Terpecahkan
Masukan
Cantilever, P=10 kN, L=3 m, EI=200 kN·m²
Hasil
δ ≈ 45 mm
At L/4 deflection check
Kesalahan Umum yang Harus Dihindari
- ✕Using beam formula for wrong support conditions
- ✕Neglecting distributed loads when present
Pertanyaan yang sering diajukan
Why limit beam deflection?
Excessive deflection causes floor sag, cracks, misalignment. Building codes limit deflection to L/240-L/360.
How does moment of inertia affect deflection?
Doubling I reduces deflection by half; this is why tall I-beams resist deflection better than wide ones.
Siap menghitung? Coba Kalkulator Beam Deflection gratis
Cobalah sendiri →