Grease Trap Sizing ಅನ್ನು ಹೇಗೆ ಲೆಕ್ಕ ಹಾಕುವುದು
Grease Trap Sizing ಎಂದರೇನು?
Grease Trap Sizing Calculator helps contractors and tradespeople accurately size, spec, and estimate materials and systems.
ಸೂತ್ರ
Trap Size (GPM) = Flow Rate from Fixtures / Retention Time
ಹಂತ-ಹಂತದ ಮಾರ್ಗದರ್ಶಿ
- 1Count fixture units connected, calculate peak flow rate
- 2Apply the formula using your project measurements
- 3Add required safety factors or waste allowances per code
Worked Examples
ಇನ್ಪುಟ್
3 sinks at 2 GPM each, 2-minute retention
ಫಲಿತಾಂಶ
Trap = 6 GPM flow → use 10 GPM trap
Common Mistakes to Avoid
- ✕Not applying code-required safety factors or derating
- ✕Forgetting to account for waste and cut losses in material estimates
ಲೆಕ್ಕಾಚಾರ ಮಾಡಲು ಸಿದ್ಧರಿದ್ದೀರಾ? ಉಚಿತ Grease Trap Sizing ಕ್ಯಾಲ್ಕುಲೇಟರ್ ಅನ್ನು ಪ್ರಯತ್ನಿಸಿ
ನೀವೇ ಪ್ರಯತ್ನಿಸಿ →