Wheatstone ಅನ್ನು ಹೇಗೆ ಲೆಕ್ಕ ಹಾಕುವುದು
Wheatstone ಎಂದರೇನು?
The Wheatstone bridge is a circuit used to measure unknown electrical resistance by balancing two legs of a bridge circuit. R_unknown = R3 × (R2/R1).
ಸೂತ್ರ
At balance: R1/R2 = R3/Rx — solve for unknown Rx
- At
- R3/Rx — solve for unknown Rx — R3/Rx — solve for unknown Rx
- R1
- R3/Rx — solve for unknown Rx — R3/Rx — solve for unknown Rx
- R2
- R3/Rx — solve for unknown Rx — R3/Rx — solve for unknown Rx
- R3
- R3 value — Variable used in the calculation
- Rx
- Rx value — Variable used in the calculation
ಹಂತ-ಹಂತದ ಮಾರ್ಗದರ್ಶಿ
- 1Four resistors arranged in a diamond (bridge) configuration
- 2A galvanometer in the centre detects current imbalance
- 3At balance: R1/R2 = R3/Rx — solve for unknown Rx
Worked Examples
ಇನ್ಪುಟ್
R1=100Ω, R2=200Ω, R3=150Ω
ಫಲಿತಾಂಶ
Rx = 300Ω
Bridge balanced when R1/R2 = R3/Rx
Common Mistakes to Avoid
- ✕Assuming the bridge must be exact — modern circuits use operational amplifiers for nulling
- ✕Ignoring lead resistance in precision measurements
Frequently Asked Questions
What is a Wheatstone bridge used for?
Precision measurement of resistance, strain gauges, temperature sensors (RTDs), and load cells.
What happens when the bridge is balanced?
No current flows through the galvanometer. The voltage across it is zero.
ಲೆಕ್ಕಾಚಾರ ಮಾಡಲು ಸಿದ್ಧರಿದ್ದೀರಾ? ಉಚಿತ Wheatstone ಕ್ಯಾಲ್ಕುಲೇಟರ್ ಅನ್ನು ಪ್ರಯತ್ನಿಸಿ
ನೀವೇ ಪ್ರಯತ್ನಿಸಿ →