learn.howToCalculate
learn.whatIsHeading
Conduit Fill Calculator helps contractors and tradespeople accurately size, spec, and estimate materials and systems.
공식
Fill % = (Sum of Wire Cross-section Areas / Conduit Area) × 100
단계별 가이드
- 1Look up wire cross-sections from NEC table, sum, compare to conduit
- 2Apply the formula using your project measurements
- 3Add required safety factors or waste allowances per code
풀어진 예시
입력
3 wires in 1/2 inch conduit, 40% max fill
결과
Fill = Σ wire areas / conduit area — must be ≤40%
피해야 할 일반적인 실수
- ✕Not applying code-required safety factors or derating
- ✕Forgetting to account for waste and cut losses in material estimates
계산할 준비가 되셨나요? 무료 Conduit Fill 계산기를 사용해 보세요
직접 시도해 보세요 →