learn.howToCalculate
learn.whatIsHeading
Calculates current distribution across parallel resistors. Shows how current splits in parallel paths.
공식
Formula: I1 = Itotal × (R2 ÷ (R1 + R2))
- I1
- Itotal × (R2 ÷ (R1 + R2)) — Itotal × (R2 ÷ (R1 + R2))
- R2
- R2 value — Variable used in the calculation
- R1
- R1 value — Variable used in the calculation
단계별 가이드
- 1Parallel resistors with same voltage across them
- 2Formula: I1 = Itotal × (R2 ÷ (R1 + R2))
- 3Current inverse to resistance
- 4Lower resistance draws more current
풀어진 예시
입력
I=10A, R1=2ohm, R2=2ohm
결과
I1=5A, I2=5A
피해야 할 일반적인 실수
- ✕Confusing current divider with voltage divider behavior
- ✕Not accounting for wire resistance in parallel paths
자주 묻는 질문
How does parallel resistance differ from series?
Parallel: currents add, voltage same, total R less than smallest; series: opposite.
Why use current dividers?
Share current load, calibrate sensors, and impedance matching.
계산할 준비가 되셨나요? 무료 Current Divider 계산기를 사용해 보세요
직접 시도해 보세요 →