learn.howToCalculate
learn.whatIsHeading
Hall-Petch strengthening: yield strength = σ₀ + k·d^(-1/2), where d is grain diameter; primary strengthening mechanism.
단계별 가이드
- 1Input material constants σ₀ and k
- 2Vary grain size
- 3Calculate predicted yield strength
풀어진 예시
입력
Steel: σ₀ = 50 MPa, k = 0.8 MPa√mm
결과
1mm grains → 50.8 MPa, 0.01mm → 80 MPa strength increase
피해야 할 일반적인 실수
- ✕Using wrong units for grain size
- ✕Applying beyond material's valid range
자주 묻는 질문
Is Hall-Petch always linear?
Approximately yes; breaks down at very small grain sizes (<100 nm).
계산할 준비가 되셨나요? 무료 Hall Petch 계산기를 사용해 보세요
직접 시도해 보세요 →