learn.howToCalculate
learn.whatIsHeading
Calculates minimum PCB trace width for current capacity considering voltage drop and temperature rise. Prevents overheating and signal degradation.
공식
Formula: width (mils) = current (A) ÷ (ampacity × thickness)
- A
- A value — Variable used in the calculation
단계별 가이드
- 1Current flowing through trace
- 2Trace length and thickness (oz/ft² of copper)
- 3Ampacity nomogram: 1 oz, 1 A/mil² roughly
- 4Formula: width (mils) = current (A) ÷ (ampacity × thickness)
- 5Account for temperature limits
풀어진 예시
입력
Current 2A, copper 1oz
결과
Width 20 mil
피해야 할 일반적인 실수
- ✕Using minimum trace width to reduce design time
- ✕Not accounting for temperature derating in high-current boards
자주 묻는 질문
Why does trace width matter?
Thin traces carry less current, overheat, and can catch fire; wide traces prevent damage.
What's voltage drop in traces?
50-100 mV acceptable for power; too much dropout regulator can't maintain voltage.
계산할 준비가 되셨나요? 무료 P C B Trace Width 계산기를 사용해 보세요
직접 시도해 보세요 →