learn.howToCalculate
learn.whatIsHeading
Pressure vessel stress depends on pressure, geometry, and material. Proper design prevents catastrophic failure; all vessels require rigorous analysis.
공식
Thin-walled hoop stress: σ = (P × r) / t
- P
- P value — Variable used in the calculation
단계별 가이드
- 1Thin-walled hoop stress: σ = (P × r) / t
- 2Thin-walled longitudinal: σ = (P × r) / (2t)
- 3Thick-walled uses complex formulas; pressure determines stress
풀어진 예시
입력
Cylinder r=200mm, t=10mm, P=5 MPa
결과
Hoop stress ≈ 100 MPa
Governs failure mode
피해야 할 일반적인 실수
- ✕Neglecting stress concentration at nozzles
- ✕Under-sizing vessel wall thickness
자주 묻는 질문
Why is hoop stress higher than longitudinal?
Hoop stress acts in two directions around vessel; only half the stress resists longitudinal loading.
How are vessel codes applied?
ASME Section VIII governs U.S. pressure vessel design; requires rigorous calculations and inspections.
계산할 준비가 되셨나요? 무료 Pressure Vessel 계산기를 사용해 보세요
직접 시도해 보세요 →