learn.howToCalculate
learn.whatIsHeading
Weld strength depends on metal, electrode, process, and joint design. Proper sizing ensures weld is stronger than base metal.
공식
Calculate fillet weld capacity: P = 0.707×t×L×F_y (simplified)
- P
- 0 — 0
- L
- L value — Variable used in the calculation
단계별 가이드
- 1Calculate fillet weld capacity: P = 0.707×t×L×F_y (simplified)
- 2Butt weld strength equals base metal if properly made
- 3Account for loading direction and stress concentration
풀어진 예시
입력
Fillet weld size t=6mm, length L=100mm, steel Fy=250 MPa
결과
P ≈ 106 kN capacity
Simplified allowable stress
피해야 할 일반적인 실수
- ✕Using leg size instead of throat dimension
- ✕Over-sizing welds (unnecessary cost and distortion)
자주 묻는 질문
Why is fillet weld size measured at 0.707t instead of full size?
Throat dimension (0.707× size) is the critical failure plane; leg dimension is measured size.
How does loading direction affect weld strength?
Welds strongest in shear along the weld axis; weakest perpendicular to axis.
계산할 준비가 되셨나요? 무료 Weld Strength 계산기를 사용해 보세요
직접 시도해 보세요 →