Screw Thread Converter ची गणना कशी करावी
Screw Thread Converter म्हणजे काय?
Screw thread converters translate between different thread designations: UNC, UNF, metric (M), BSW, etc.
सूत्र
Inch: #10-24 UNC = 10 size, 24 threads/inch
- UNC
- 10 size — 10 size
चरण-दर-चरण मार्गदर्शक
- 1Metric: M10 = 10 mm diameter, coarse (1.5 mm pitch) or fine (1.25 mm)
- 2Inch: #10-24 UNC = 10 size, 24 threads/inch
- 3Non-interchangeable between systems (need washers, adapters)
Worked Examples
इनपुट
M8 metric thread
परिणाम
8 mm diameter, UNC equivalent #5-40, similar size
Not exactly interchangeable
Common Mistakes to Avoid
- ✕Assuming metric and inch are compatible (they're not)
- ✕Not checking thread pitch (critical for alignment)
Frequently Asked Questions
Can metric and inch threads be used interchangeably?
No, slightly different pitch and angle. Using wrong thread can damage equipment.
What's the difference between coarse and fine pitch?
Fine pitch holds tighter, suits thin walls, vibration-resistant. Coarse easier to assemble, stronger.
गणना करण्यास तयार आहात? विनामूल्य Screw Thread Converter कॅल्क्युलेटर वापरून पहा
ते स्वतः वापरून पहा →