learn.howToCalculate
learn.whatIsHeading
Grease Trap Sizing Calculator helps contractors and tradespeople accurately size, spec, and estimate materials and systems.
ସୂତ୍ର
Trap Size (GPM) = Flow Rate from Fixtures / Retention Time
ଷ୍ଟେପ୍-ଷ୍ଟେପ୍ ଗାଇଡ୍ |
- 1Count fixture units connected, calculate peak flow rate
- 2Apply the formula using your project measurements
- 3Add required safety factors or waste allowances per code
ସମାଧାନ ହୋଇଥିବା ଉଦାହରଣ
ଇନପୁଟ୍
3 sinks at 2 GPM each, 2-minute retention
ଫଳ
Trap = 6 GPM flow → use 10 GPM trap
ଏଡ଼ାଇବା ଯୋଗ୍ୟ ସାଧାରଣ ଭୁଲ
- ✕Not applying code-required safety factors or derating
- ✕Forgetting to account for waste and cut losses in material estimates
learn.ctaText
ଏହାକୁ ନିଜେ ଚେଷ୍ଟା କରନ୍ତୁ →