learn.howToCalculate
learn.whatIsHeading
Drain Slope Calculator helps contractors and tradespeople accurately size, spec, and estimate materials and systems.
Wzór
Slope = Rise / Run (min 1/4 inch per foot for drains)
Przewodnik krok po kroku
- 1Measure pipe run length, calculate rise needed for proper slope
- 2Apply the formula using your project measurements
- 3Add required safety factors or waste allowances per code
Rozwiązane przykłady
Wejście
20 foot drain run, 1/4 per foot slope
Wynik
Rise = 20 × 0.25 = 5 inches total drop
Częste błędy do unikania
- ✕Not applying code-required safety factors or derating
- ✕Forgetting to account for waste and cut losses in material estimates
Gotowy do obliczeń? Wypróbuj darmowy kalkulator Drain Slope
Spróbuj sam →