learn.howToCalculate
learn.whatIsHeading
Pipe sizing selects appropriate diameter to convey water at acceptable velocity and pressure drop. Too small causes excessive friction; too large wastes material.
Guia passo a passo
- 1Apply Hazen-Williams or Darcy-Weisbach equations
- 2Velocity typically 0.6-2.4 m/s for water systems
- 3Calculate diameter and pressure drop
Exemplos resolvidos
Entrada
Q = 0.05 m³/s water flow, C = 150 (PVC), L = 100 m
Resultado
D ≈ 50-63 mm for <1 m/100 m drop
Hazen-Williams estimate
Erros comuns a evitar
- ✕Using smooth pipe assumptions on old systems
- ✕Neglecting temperature effects on viscosity
Perguntas frequentes
Why limit velocity?
Too high velocity causes excessive friction loss and noise; too low allows settling and corrosion.
How does pipe age affect sizing?
Roughness increases with age, increasing friction losses. Design for aged conditions.
Pronto para calcular? Experimente a calculadora Pipe Sizing gratuita
Experimente você mesmo →