Cum se calculează Beam Deflection
Ce este Beam Deflection?
Beam deflection calculates downward displacement under loading. Engineers use this to ensure beams don't sag excessively and meet serviceability requirements.
Formulă
The calculator applies beam deflection formulas: δ = PL³/(3EI) for cantilever
Ghid pas cu pas
- 1Input beam type (cantilever, simply supported, etc.), load type, material properties, and geometry
- 2The calculator applies beam deflection formulas: δ = PL³/(3EI) for cantilever
- 3Results show maximum deflection and compliance with limits
Exemple rezolvate
Intrare
Cantilever, P=10 kN, L=3 m, EI=200 kN·m²
Rezultat
δ ≈ 45 mm
At L/4 deflection check
Greșeli frecvente de evitat
- ✕Using beam formula for wrong support conditions
- ✕Neglecting distributed loads when present
Întrebări frecvente
Why limit beam deflection?
Excessive deflection causes floor sag, cracks, misalignment. Building codes limit deflection to L/240-L/360.
How does moment of inertia affect deflection?
Doubling I reduces deflection by half; this is why tall I-beams resist deflection better than wide ones.
Ești gata să calculezi? Încercați calculatorul gratuit Beam Deflection
Încercați singur →