Cum se calculează Gear Ratio
Ce este Gear Ratio?
Gear ratio is the speed reduction/increase between input and output shafts. It determines torque multiplication and shaft speeds.
Formulă
Ratio = N_input / N_output = N_driven / N_driver = T_output / T_input
Ghid pas cu pas
- 1Ratio = N_input / N_output = N_driven / N_driver = T_output / T_input
- 2Spur gears: ratio = number of teeth on driven / number on driver
- 3Power is conserved: P = T × ω
Exemple rezolvate
Intrare
Input 1800 rpm, output 600 rpm
Rezultat
Gear ratio = 3:1 (3× speed reduction, 3× torque increase)
Power unchanged
Greșeli frecvente de evitat
- ✕Confusing speed ratio with force multiplication
- ✕Neglecting friction losses in extended calculations
Întrebări frecvente
Can any two gears mesh together?
No, they must have same pressure angle and pitch. Teeth must fit smoothly without interference.
How is efficiency handled?
Mechanical power loss (5-10%) converts to heat; P_out = P_in × η.
Ești gata să calculezi? Încercați calculatorul gratuit Gear Ratio
Încercați singur →