Cum se calculează Hall Petch
Ce este Hall Petch?
Hall-Petch strengthening: yield strength = σ₀ + k·d^(-1/2), where d is grain diameter; primary strengthening mechanism.
Ghid pas cu pas
- 1Input material constants σ₀ and k
- 2Vary grain size
- 3Calculate predicted yield strength
Exemple rezolvate
Intrare
Steel: σ₀ = 50 MPa, k = 0.8 MPa√mm
Rezultat
1mm grains → 50.8 MPa, 0.01mm → 80 MPa strength increase
Greșeli frecvente de evitat
- ✕Using wrong units for grain size
- ✕Applying beyond material's valid range
Întrebări frecvente
Is Hall-Petch always linear?
Approximately yes; breaks down at very small grain sizes (<100 nm).
Ești gata să calculezi? Încercați calculatorul gratuit Hall Petch
Încercați singur →