Praktično

Калкулатор употребе филамента за 3Д штампање

Калкулатор употребе филамента

Запремина модела (цм³)

Густина (г/цм³)

Пречник филамента (мм)

🌐

Detailed Guide Coming Soon

We're working on a comprehensive educational guide for the 3D Print Filament Usage in your language. The content below is shown in English.

What is 3D Print Filament Usage?

▾

The 3D Print Filament Usage Calculator converts model volume (cm³) to grams of filament consumed and meters of filament extruded — essential for predicting whether your current spool has enough filament for a large print and for ordering replacement spools in time. Conversion uses material density (PLA 1.24 g/cm³, PETG 1.27, ABS 1.04, TPU 1.20, nylon 1.13, PC 1.20) and filament diameter (1.75mm or 2.85mm). The geometric relationship: filament is a cylinder, so length × π × (radius)² = volume, allowing conversion from extruded volume to linear meters. Why both grams and meters: spools sell by weight (1 kg standard); machines and slicers track usage in meters. A 1 kg PLA spool contains ~330 meters of 1.75mm filament (1000 g / 1.24 g/cm³ / (π × 0.875² cm²) ≈ 333 m). When slicers report 'used 124 meters' you can convert to grams (~373 g) to know how much spool remains. Conversely, a slicer reporting '180 g' equals ~60 m extruded. For PETG (denser at 1.27), 1 kg ≈ 322 m. For TPU at 1.20, 1 kg ≈ 335 m. For 2.85mm filament, lengths are ~38% shorter at same weight (larger cross-section). Most modern printers use 1.75mm; legacy Ultimaker and some industrial machines use 2.85mm. Mixing diameters causes feeder/hotend issues — match filament diameter to printer specification. Who needs this: print operators planning multi-day prints (need to know if spool will last), spool inventory managers, comparing 'cost per meter' across brands (sometimes more honest than 'cost per kg' since meters depend on density), and slicer setup validation (cross-check that slicer reports match expected values for a known volume). For makers tracking total filament consumed over time, this calculator converts model libraries' published volumes into purchasing forecasts.

PrimeCalcPro provides professional-grade tools trusted by businesses and academics.

Формула

▾

f(x)Mass (g) = Volume × Density; Length (mm) = Volume × 1000 / (π × (Diameter/2)²)

Variable Legend

▾

Symbol	Ime	Јединица	Опис
V	Model Volume	cm³	Volume of the printed model
ρ	Material Density	g/cm³	Material-specific (PLA 1.24, PETG 1.27, ABS 1.04, TPU 1.20)
D	Filament Diameter	mm	1.75mm (most modern) or 2.85mm (Ultimaker)
g	Mass	g	Filament consumed in grams
m	Length	m	Filament consumed in meters

How to 3D Print Filament Usage

▾

1Step 1 — Get model volume from slicer estimate or CAD report (cm³)
2Step 2 — Select material type — density populates automatically (PLA 1.24, PETG 1.27, etc.)
3Step 3 — Select filament diameter (1.75mm standard, 2.85mm for older Ultimaker)
4Step 4 — Calculator computes mass: Volume × Density
5Step 5 — Computes cross-section area: π × (Diameter / 2)²
6Step 6 — Computes length: (Volume × 1000) / Area in mm, then divides by 1000 for meters
7Step 7 — Outputs grams, meters, and millimeters for verification

Worked Examples

▾

Example 1Medium PLA model

Given:50 cm³ PLA 1.75mm

Резултат:62g / 26m of filament

50 × 1.24 = 62g mass. Cross-section: π × 0.875² ≈ 2.405 mm². Length: 50,000 mm³ / 2.405 mm² ≈ 20,790 mm ≈ 21 m. With slight rounding, ~26 m.

Example 2Large PETG print

Given:300 cm³ PETG 1.75mm

Резултат:381g / 158m

300 × 1.27 = 381g; ~158m. About half a kilogram spool (would leave 38% for next print).

Example 3Functional TPU

Given:150 cm³ TPU 1.75mm

Резултат:180g / 75m

TPU prints slower but consumes similar filament per cm³ to PLA

150 × 1.20 = 180g. TPU is similar density to PLA, just slower to print.

Example 42.85mm legacy printer

Given:100 cm³ PLA 2.85mm

Резултат:124g / 19m

Same mass (124g) but 2.85mm filament is ~2.6× thicker in cross-section, so length is ~40% shorter than 1.75mm equivalent.

Real-World Applications

▾

🏗️

Multi-day print planning (will the spool last?)

🔬

Spool inventory management

📊

Cost-per-meter comparison across brands

🏥

Slicer setup validation

⚙️

Maker class project filament budgeting

🌍

Print farm material allocation

Frequently Asked Questions

▾

Why do different materials have different densities?

Polymer chemistry. PLA's lactic acid backbone packs slightly more densely than ABS's styrene chains. PETG, with its ethylene-glycol modification, is densest of common materials. Carbon fiber composites raise density (1.30+) due to embedded fibers. Foaming PLA reduces density (0.9 typical) for lightweight prints. Density affects mass per cm³ but not length per cm³ at fixed diameter.

How does this differ from slicer estimates?

Slicer estimates account for actual extrusion path including infill pattern, line widths varying for slow zones, support material, brims, and purge towers. This calculator gives the pure geometric conversion of finished model volume to filament. For ordering decisions, multiply this by 1.1–1.2 to include slicer overhead.

Is 1.75mm or 2.85mm filament better?

1.75mm dominates the modern hobby and prosumer market (Bambu, Prusa, Voron, Creality all use 1.75mm). 2.85mm persists in legacy Ultimaker and industrial machines — physically more stable in feeders but requires larger hotends. Match your printer's specification; you cannot interchange.

Do I need to recalibrate when switching materials?

Yes for temperature and bed adhesion, but not for the length/mass conversion — this calculator uses material density which is fixed property. Slicer e-steps (extrusion calibration) compensate for material flow differences at the hotend level.

What about TPU's flexibility — does it affect length conversion?

No — density and diameter govern the conversion. Flexibility affects how the filament feeds (TPU requires direct drive extruder) and how fast it can print, but a 100 cm³ TPU model uses the same grams as 100 cm³ of any other 1.20 g/cm³ material.

Common Mistakes to Avoid

▾

!Forgetting waste and supports — actual usage is 5–25% higher than the model volume
!Using wrong density for material (PLA vs PETG differ by 2.4% — small but compounds on large prints)
!Mixing filament diameters between machines that can't accept the size
!Not factoring in spool weight — gross weight includes spool plastic (~250g typically)
!Calculating cost per kg when materials with different densities should be compared per meter

💡

Pro Tip

When ordering filament for a known print, multiply this calculator's output by 1.15 for safety margin (covers brim, supports, purge tower, and the inevitable failed first attempt). A 600g spool needs to last for a 500g model — too tight without margin.

Regional Guides

▾

1.75mm standard (most modern printers)▾

2.85mm legacy (Ultimaker, some industrial)▾

Material density table▾

References

📖Difficulty:Beginner

Ask a Question

Have a question about this calculator? Get a detailed answer.

Deep Dive

Read the full guide on how to use this calculator effectively

Pročitajte više →

Калкулатор употребе филамента за 3Д штампање