Pressure Vesselని ఎలా లెక్కించాలి
Pressure Vessel అంటే ఏమిటి?
Pressure vessel stress depends on pressure, geometry, and material. Proper design prevents catastrophic failure; all vessels require rigorous analysis.
సూత్రం
Thin-walled hoop stress: σ = (P × r) / t
- P
- P value — Variable used in the calculation
దశల వారీ గైడ్
- 1Thin-walled hoop stress: σ = (P × r) / t
- 2Thin-walled longitudinal: σ = (P × r) / (2t)
- 3Thick-walled uses complex formulas; pressure determines stress
పరిష్కరించిన ఉదాహరణలు
ఇన్పుట్
Cylinder r=200mm, t=10mm, P=5 MPa
ఫలితం
Hoop stress ≈ 100 MPa
Governs failure mode
నివారించాల్సిన సాధారణ తప్పులు
- ✕Neglecting stress concentration at nozzles
- ✕Under-sizing vessel wall thickness
తరచుగా అడిగే ప్రశ్నలు
Why is hoop stress higher than longitudinal?
Hoop stress acts in two directions around vessel; only half the stress resists longitudinal loading.
How are vessel codes applied?
ASME Section VIII governs U.S. pressure vessel design; requires rigorous calculations and inspections.
లెక్కించడానికి సిద్ధంగా ఉన్నారా? ఉచిత Pressure Vessel కాలిక్యులేటర్ని ప్రయత్నించండి
దీన్ని మీరే ప్రయత్నించండి →