วิธีการคำนวณ Beam Deflection
learn.whatIsHeading
Beam deflection calculates downward displacement under loading. Engineers use this to ensure beams don't sag excessively and meet serviceability requirements.
สูตร
The calculator applies beam deflection formulas: δ = PL³/(3EI) for cantilever
คำแนะนำทีละขั้นตอน
- 1Input beam type (cantilever, simply supported, etc.), load type, material properties, and geometry
- 2The calculator applies beam deflection formulas: δ = PL³/(3EI) for cantilever
- 3Results show maximum deflection and compliance with limits
ตัวอย่างที่มีคำตอบ
อินพุต
Cantilever, P=10 kN, L=3 m, EI=200 kN·m²
ผลลัพธ์
δ ≈ 45 mm
At L/4 deflection check
ข้อผิดพลาดที่ควรหลีกเลี่ยง
- ✕Using beam formula for wrong support conditions
- ✕Neglecting distributed loads when present
คำถามที่พบบ่อย
Why limit beam deflection?
Excessive deflection causes floor sag, cracks, misalignment. Building codes limit deflection to L/240-L/360.
How does moment of inertia affect deflection?
Doubling I reduces deflection by half; this is why tall I-beams resist deflection better than wide ones.
พร้อมที่จะคำนวณแล้วหรือยัง? ลองใช้เครื่องคิดเลข Beam Deflection ฟรี
ลองด้วยตัวคุณเอง→