Skip to main content

Paano Kalkulahin si Lumber Dimension Converter

Ano ang Lumber Dimension Converter?

The Lumber Dimension Converter handles the confusing reality that lumber labeled "2×4" is not actually 2 inches × 4 inches — it's 1.5 × 3.5 inches actual. This nominal vs actual difference (a residual of historical milling standards before kiln drying) catches every beginner woodworker. The calculator converts nominal sizes (1×2 through 6×6) to actual inches and millimeters, calculates board feet (BF, the standard lumber volume unit), converts length units, and computes total project costs.

Pormula

Board Feet (BF) = (Nominal Thickness × Nominal Width × Length in feet) ÷ 12; Actual dimensions per US softwood standard table
BF
Board Feet (BF) — 1 BF = 144 cubic inches = ~0.00236 m³

Step-by-Step na Gabay

  1. 1Select nominal lumber size from common dropdown (1×2 through 6×6)
  2. 2Enter length and unit (feet, inches, meters, centimeters)
  3. 3Enter quantity of pieces
  4. 4Enter price per board foot for cost calculation
  5. 5Calculator outputs total board feet, actual dimensions in inches and mm, length in all units, and total cost
  6. 6Board feet calculation uses nominal dimensions (industry standard)

Mga Nalutas na Halimbawa

Input
Five 2×4s at 8 feet, $3.50/BF
Resulta
BF = (2×4×8)/12 = 5.33 BF/piece × 5 = 26.67 BF, $93.33 total
Input
One 1×6 at 10 feet
Resulta
5 BF, actual 0.75″ × 5.5″, 254 mm length
Input
4×4 post at 8 feet
Resulta
10.67 BF, actual 3.5″ × 3.5″ — standard fence post

Mga Karaniwang Mali na Dapat Iwasan

  • ✕Calculating board feet using actual dimensions — must use nominal
  • ✕Assuming 2×4 = 2 inches × 4 inches — it's 1.5 × 3.5 inches actual
  • ✕Forgetting drying causes additional shrinkage — kiln-dried is more accurate than green
  • ✕Mixing hardwood (often sold by actual) and softwood (sold by nominal) measurement systems

Mga madalas itanong

Why is 2×4 actually 1.5×3.5?

Original 2×4 was rough-sawn from green wood at 2×4 inches. Drying shrinks wood, and surfacing (planing for smooth surfaces) removes another ~¼ inch per side. By the time lumber reaches retail, dimensions are reduced — the industry kept the original "nominal" name for tradition and supply chain consistency.

Is there a metric equivalent?

Yes — most US 2×4s are sold as 38mm × 89mm internationally (actual measurements). Some European countries use slightly different sizing (45 × 95mm). When importing/exporting, the metric measurement is the actual size, not nominal.

Handa nang kalkulahin? Subukan ang libreng Lumber Dimension Converter Calculator

Subukan ito sa iyong sarili →

Mga Setting

PrivacyMga TuntuninTungkol© 2026 PrimeCalcPro