Paano Kalkulahin si Spring Design
Ano ang Spring Design?
Spring design calculates stress and deflection under load. Springs store and release energy, used in many mechanical systems.
Pormula
Calculate stress: τ = (16×D×F) / (π×d³) for compression spring
- D
- D value — Variable used in the calculation
- F
- F value — Variable used in the calculation
Step-by-Step na Gabay
- 1Calculate stress: τ = (16×D×F) / (π×d³) for compression spring
- 2Deflection: δ = (64×N×F×D³) / (G×d⁴)
- 3Verify safety margin and fatigue life
Mga Nalutas na Halimbawa
Input
Spring wire d=5mm, mean dia D=40mm, N=10 coils, F=100N
Resulta
Deflection ≈ 3.4 mm, stress ≈ 82 MPa
Typical mild steel spring
Mga Karaniwang Mali na Dapat Iwasan
- ✕Neglecting stress concentration factor
- ✕Using wrong wire properties (modulus G)
Mga madalas itanong
Why does mean diameter matter more than wire diameter?
Spring stiffness proportional to d⁴ but stress uses d³; larger diameter dominates stiffness.
What causes spring failure?
Fatigue from cyclic loading, stress concentration at coils, corrosion.
Handa nang kalkulahin? Subukan ang libreng Spring Design Calculator
Subukan ito sa iyong sarili →