Beam Deflection Nasıl Hesaplanır?
learn.whatIsHeading
Beam deflection calculates downward displacement under loading. Engineers use this to ensure beams don't sag excessively and meet serviceability requirements.
Formül
The calculator applies beam deflection formulas: δ = PL³/(3EI) for cantilever
Adım Adım Kılavuz
- 1Input beam type (cantilever, simply supported, etc.), load type, material properties, and geometry
- 2The calculator applies beam deflection formulas: δ = PL³/(3EI) for cantilever
- 3Results show maximum deflection and compliance with limits
Çözümlü Örnekler
Giriş
Cantilever, P=10 kN, L=3 m, EI=200 kN·m²
Sonuç
δ ≈ 45 mm
At L/4 deflection check
Kaçınılması Gereken Yaygın Hatalar
- ✕Using beam formula for wrong support conditions
- ✕Neglecting distributed loads when present
Sık sorulan sorular
Why limit beam deflection?
Excessive deflection causes floor sag, cracks, misalignment. Building codes limit deflection to L/240-L/360.
How does moment of inertia affect deflection?
Doubling I reduces deflection by half; this is why tall I-beams resist deflection better than wide ones.
Hesaplamaya hazır mısınız? Ücretsiz Beam Deflection Hesaplayıcıyı deneyin
Kendiniz deneyin →