Skip to main content

Lumber Dimension Converter Nasıl Hesaplanır?

learn.whatIsHeading

The Lumber Dimension Converter handles the confusing reality that lumber labeled "2×4" is not actually 2 inches × 4 inches — it's 1.5 × 3.5 inches actual. This nominal vs actual difference (a residual of historical milling standards before kiln drying) catches every beginner woodworker. The calculator converts nominal sizes (1×2 through 6×6) to actual inches and millimeters, calculates board feet (BF, the standard lumber volume unit), converts length units, and computes total project costs.

Formül

Board Feet (BF) = (Nominal Thickness × Nominal Width × Length in feet) ÷ 12; Actual dimensions per US softwood standard table
BF
Board Feet (BF) — 1 BF = 144 cubic inches = ~0.00236 m³

Adım Adım Kılavuz

  1. 1Select nominal lumber size from common dropdown (1×2 through 6×6)
  2. 2Enter length and unit (feet, inches, meters, centimeters)
  3. 3Enter quantity of pieces
  4. 4Enter price per board foot for cost calculation
  5. 5Calculator outputs total board feet, actual dimensions in inches and mm, length in all units, and total cost
  6. 6Board feet calculation uses nominal dimensions (industry standard)

Çözümlü Örnekler

Giriş
Five 2×4s at 8 feet, $3.50/BF
Sonuç
BF = (2×4×8)/12 = 5.33 BF/piece × 5 = 26.67 BF, $93.33 total
Giriş
One 1×6 at 10 feet
Sonuç
5 BF, actual 0.75″ × 5.5″, 254 mm length
Giriş
4×4 post at 8 feet
Sonuç
10.67 BF, actual 3.5″ × 3.5″ — standard fence post

Kaçınılması Gereken Yaygın Hatalar

  • ✕Calculating board feet using actual dimensions — must use nominal
  • ✕Assuming 2×4 = 2 inches × 4 inches — it's 1.5 × 3.5 inches actual
  • ✕Forgetting drying causes additional shrinkage — kiln-dried is more accurate than green
  • ✕Mixing hardwood (often sold by actual) and softwood (sold by nominal) measurement systems

Sık sorulan sorular

Why is 2×4 actually 1.5×3.5?

Original 2×4 was rough-sawn from green wood at 2×4 inches. Drying shrinks wood, and surfacing (planing for smooth surfaces) removes another ~¼ inch per side. By the time lumber reaches retail, dimensions are reduced — the industry kept the original "nominal" name for tradition and supply chain consistency.

Is there a metric equivalent?

Yes — most US 2×4s are sold as 38mm × 89mm internationally (actual measurements). Some European countries use slightly different sizing (45 × 95mm). When importing/exporting, the metric measurement is the actual size, not nominal.

Hesaplamaya hazır mısınız? Ücretsiz Lumber Dimension Converter Hesaplayıcıyı deneyin

Kendiniz deneyin →

Ayarlar

GizlilikKoşullarHakkında© 2026 PrimeCalcPro