Як розрахувати Beam Deflection
Що таке Beam Deflection?
Beam deflection calculates downward displacement under loading. Engineers use this to ensure beams don't sag excessively and meet serviceability requirements.
Формула
The calculator applies beam deflection formulas: δ = PL³/(3EI) for cantilever
Покрокова інструкція
- 1Input beam type (cantilever, simply supported, etc.), load type, material properties, and geometry
- 2The calculator applies beam deflection formulas: δ = PL³/(3EI) for cantilever
- 3Results show maximum deflection and compliance with limits
Розв'язані приклади
Введення
Cantilever, P=10 kN, L=3 m, EI=200 kN·m²
Результат
δ ≈ 45 mm
At L/4 deflection check
Поширені помилки
- ✕Using beam formula for wrong support conditions
- ✕Neglecting distributed loads when present
Часті запитання
Why limit beam deflection?
Excessive deflection causes floor sag, cracks, misalignment. Building codes limit deflection to L/240-L/360.
How does moment of inertia affect deflection?
Doubling I reduces deflection by half; this is why tall I-beams resist deflection better than wide ones.
Готові порахувати? Спробуйте безкоштовний калькулятор Beam Deflection
Спробуйте самі →