learn.howToCalculate
learn.whatIsHeading
Belt drive transmits power between shafts using flexible belt around pulleys. It's simple, quiet, and provides overload protection through slipping.
Công thức
Calculate: Speed ratio = D_driven / D_driver where D is pulley diameter
- D
- D value — Variable used in the calculation
Hướng dẫn từng bước
- 1Calculate: Speed ratio = D_driven / D_driver where D is pulley diameter
- 2Torque: T = P / ω (power divided by angular velocity)
- 3Tension and slippage determine power capacity
Ví dụ có lời giải
đầu vào
Driver 100 mm diameter at 1800 rpm, driven 200 mm
Kết quả
Output speed = 900 rpm, 2:1 reduction
Torque doubles
Lỗi thường gặp cần tránh
- ✕Over-tensioning belts (damages bearings)
- ✕Neglecting wrap angle effects on friction
Câu hỏi thường gặp
Why slip in belt drives?
Slight slip absorbs shock loads, protects driven equipment. Slip is normal (1-3%) and expected.
How do you prevent excessive slip?
Proper belt tension and friction material selection maintain power transmission.
Sẵn sàng để tính toán? Dùng thử Máy tính Belt Drive miễn phí
Hãy tự mình thử →