learn.howToCalculate
learn.whatIsHeading
Conduit Fill Calculator helps contractors and tradespeople accurately size, spec, and estimate materials and systems.
Công thức
Fill % = (Sum of Wire Cross-section Areas / Conduit Area) × 100
Hướng dẫn từng bước
- 1Look up wire cross-sections from NEC table, sum, compare to conduit
- 2Apply the formula using your project measurements
- 3Add required safety factors or waste allowances per code
Ví dụ có lời giải
đầu vào
3 wires in 1/2 inch conduit, 40% max fill
Kết quả
Fill = Σ wire areas / conduit area — must be ≤40%
Lỗi thường gặp cần tránh
- ✕Not applying code-required safety factors or derating
- ✕Forgetting to account for waste and cut losses in material estimates
Sẵn sàng để tính toán? Dùng thử Máy tính Conduit Fill miễn phí
Hãy tự mình thử →