learn.howToCalculate
learn.whatIsHeading
Hall-Petch strengthening: yield strength = σ₀ + k·d^(-1/2), where d is grain diameter; primary strengthening mechanism.
Hướng dẫn từng bước
- 1Input material constants σ₀ and k
- 2Vary grain size
- 3Calculate predicted yield strength
Ví dụ có lời giải
đầu vào
Steel: σ₀ = 50 MPa, k = 0.8 MPa√mm
Kết quả
1mm grains → 50.8 MPa, 0.01mm → 80 MPa strength increase
Lỗi thường gặp cần tránh
- ✕Using wrong units for grain size
- ✕Applying beyond material's valid range
Câu hỏi thường gặp
Is Hall-Petch always linear?
Approximately yes; breaks down at very small grain sizes (<100 nm).
Sẵn sàng để tính toán? Dùng thử Máy tính Hall Petch miễn phí
Hãy tự mình thử →