Beam Deflection ஐ எப்படி கணக்கிடுவது
Beam Deflection என்றால் என்ன?
Beam deflection calculates downward displacement under loading. Engineers use this to ensure beams don't sag excessively and meet serviceability requirements.
சூத்திரம்
The calculator applies beam deflection formulas: δ = PL³/(3EI) for cantilever
படிப்படியான வழிகாட்டி
- 1Input beam type (cantilever, simply supported, etc.), load type, material properties, and geometry
- 2The calculator applies beam deflection formulas: δ = PL³/(3EI) for cantilever
- 3Results show maximum deflection and compliance with limits
தீர்க்கப்பட்ட எடுத்துக்காட்டுகள்
உள்ளீடு
Cantilever, P=10 kN, L=3 m, EI=200 kN·m²
முடிவு
δ ≈ 45 mm
At L/4 deflection check
தவிர்க்க வேண்டிய பொதுவான தவறுகள்
- ✕Using beam formula for wrong support conditions
- ✕Neglecting distributed loads when present
அடிக்கடி கேட்கப்படும் கேள்விகள்
Why limit beam deflection?
Excessive deflection causes floor sag, cracks, misalignment. Building codes limit deflection to L/240-L/360.
How does moment of inertia affect deflection?
Doubling I reduces deflection by half; this is why tall I-beams resist deflection better than wide ones.
கணக்கிடத் தயாரா? இலவச Beam Deflection கால்குலேட்டரை முயற்சிக்கவும்
நீங்களே முயற்சிக்கவும் →