Hall Petch ஐ எப்படி கணக்கிடுவது
Hall Petch என்றால் என்ன?
Hall-Petch strengthening: yield strength = σ₀ + k·d^(-1/2), where d is grain diameter; primary strengthening mechanism.
படிப்படியான வழிகாட்டி
- 1Input material constants σ₀ and k
- 2Vary grain size
- 3Calculate predicted yield strength
தீர்க்கப்பட்ட எடுத்துக்காட்டுகள்
உள்ளீடு
Steel: σ₀ = 50 MPa, k = 0.8 MPa√mm
முடிவு
1mm grains → 50.8 MPa, 0.01mm → 80 MPa strength increase
தவிர்க்க வேண்டிய பொதுவான தவறுகள்
- ✕Using wrong units for grain size
- ✕Applying beyond material's valid range
அடிக்கடி கேட்கப்படும் கேள்விகள்
Is Hall-Petch always linear?
Approximately yes; breaks down at very small grain sizes (<100 nm).
கணக்கிடத் தயாரா? இலவச Hall Petch கால்குலேட்டரை முயற்சிக்கவும்
நீங்களே முயற்சிக்கவும் →