Spring Design ஐ எப்படி கணக்கிடுவது
Spring Design என்றால் என்ன?
Spring design calculates stress and deflection under load. Springs store and release energy, used in many mechanical systems.
சூத்திரம்
Calculate stress: τ = (16×D×F) / (π×d³) for compression spring
- D
- D value — Variable used in the calculation
- F
- F value — Variable used in the calculation
படிப்படியான வழிகாட்டி
- 1Calculate stress: τ = (16×D×F) / (π×d³) for compression spring
- 2Deflection: δ = (64×N×F×D³) / (G×d⁴)
- 3Verify safety margin and fatigue life
தீர்க்கப்பட்ட எடுத்துக்காட்டுகள்
உள்ளீடு
Spring wire d=5mm, mean dia D=40mm, N=10 coils, F=100N
முடிவு
Deflection ≈ 3.4 mm, stress ≈ 82 MPa
Typical mild steel spring
தவிர்க்க வேண்டிய பொதுவான தவறுகள்
- ✕Neglecting stress concentration factor
- ✕Using wrong wire properties (modulus G)
அடிக்கடி கேட்கப்படும் கேள்விகள்
Why does mean diameter matter more than wire diameter?
Spring stiffness proportional to d⁴ but stress uses d³; larger diameter dominates stiffness.
What causes spring failure?
Fatigue from cyclic loading, stress concentration at coils, corrosion.
கணக்கிடத் தயாரா? இலவச Spring Design கால்குலேட்டரை முயற்சிக்கவும்
நீங்களே முயற்சிக்கவும் →