Surface Roughness ஐ எப்படி கணக்கிடுவது
Surface Roughness என்றால் என்ன?
Surface roughness affects friction, wear, fatigue, and appearance. Proper specification prevents unnecessary cost or inadequate performance.
படிப்படியான வழிகாட்டி
- 1Measure Ra (average roughness) in micrometers or microinches
- 2Typical values: rough (3.2-6.3 μm), normal (0.8-1.6 μm), smooth (0.05-0.2 μm)
- 3Specify based on functional requirements
தீர்க்கப்பட்ட எடுத்துக்காட்டுகள்
உள்ளீடு
Bearing surface typically requires Ra <0.4 μm (smooth)
முடிவு
Specify fine grinding or lapping
Affects bearing life
தவிர்க்க வேண்டிய பொதுவான தவறுகள்
- ✕Over-specifying finish (unnecessary cost)
- ✕Under-specifying and causing functional problems
அடிக்கடி கேட்கப்படும் கேள்விகள்
Why does roughness matter for bearings?
Rough surfaces cause higher friction and wear. Smooth surfaces reduce wear 10-100×.
Does fine surface finish improve fatigue strength?
Yes, polished surfaces have ~50% higher fatigue strength than rough surfaces.
கணக்கிடத் தயாரா? இலவச Surface Roughness கால்குலேட்டரை முயற்சிக்கவும்
நீங்களே முயற்சிக்கவும் →